Call 1-866-466-9205 for best prices
from one of our friendly Customer Care Reps
from one of our friendly Customer Care Reps
HGS-100B HEAT/GUARD STAND
This stainless steel, vinyl-coated heat guard / stand makes lamp operation safer by protecting against accidental burn injury. Special insulators keep it from touching the lamp housing, thus minimizing heat conduction.
The HGS-100B helps prevent mechanical shock damage, resulting in substantial savings on bulb and filter replacement costs. In addition, the HGS-100B acts as a stand so that the lamp head may be placed filter-side down on a level surface without damage to the lamp. |
Item #700654 |
FA-100 FLEXIBLE ARMS
Designed for maximum versatility, the FA-100 measures 24" (61cm) when fully extended, and allows 360° rotation of the lamp head, it is ruggedly constructed of cast aluminum. The lamp head attaches to an adjustable pin on the FA-100 that can be pivoted as desired and locked into any horizontal or vertical position.
Flexible arms may be used with the Spectroline W6 Wall Mount or B6 Bench Mount (both separately available). The W6 Wall Mount attaches easily to a wall and utilizes a stationary pin to mount the arm. The Bench Mount also has a stationary pin, attached to a 36" (91cm) pole that may be secured to a bench. The FA-100 can be adjusted to any height on the pole. |
Flexible Arm- Item #700649BBench Mount- Item #700649C |
MODULAR BLACK LIGHT MOUNTING SYSTEM
The Handle Adapter (P/N 622595) attaches the standard Black Lights (ZB-100, ZB-100F, ZB-150F-SB) to the other Modular Black Light Fixtures available. No need for special tools or drilling necessary.
MODEL FPS-1™ FLUORESCENCE PHOTOGRAPHY SYSTEM
The Model FPS-1™ Fluorescence Photography System is complete and ready to go right out of the box. It works with existing particles and penetrants. Fluorescence exposure settings are preconfigured on the camera and all the accessories you need are included. Now you can document your PSM-5 TAM panel or indications in the booth or take fluorescence photographs on the shop floor--even outdoors--with no need for darkness!
Features: •Digital camera with 12 Mega-pixel resolution* •Three camera filters for versatile performance with blue or ultraviolet light •Electronic flash with custom made interference filter •Flash bracket with flex arm •Off-camera hot shoe adapter for flash •1 GB SD memory •USB 2.0 SD card reader for easy picture transfers •Interface cables for direct connection to computer •Battery chargers and spare batteries for camera and flash •Operating manual and custom BlueLine fluorescence photography manual •Rugged shipping case with custom-cut foam |
Item #700694A |
GOULD BASS DLM-1000 DIGITAL RADIOMETERS- THE INDUSTRY STANDARD
The GOULD/BASS DLM-1000 digital radiometers are portable, digital instruments that measure both blacklight intensity in the spectral range of 320-380 nanometers in microwatts per square centimeter (µW/cm2) and visible light intensity of 420-680 nanometers (photometric response) in Lux or in foot-candles, depending on sensor selected.
The latest LSI circuit design and display technology is used to achieve the lowest possible component count. This, in turn, assures reliability, accuracy, stability, and rugged dependability. In combination with their functional and aesthetic design, these radiometers are the easiest to handle blacklight, and incandescent or fluorescent visible light measuring instruments available today. Operation: 1. Slide the "POWER" to the "ON" position. 2. Turn the lamp on or apply power to the light source being measured. 3. Place the sensor where the irradiance/illuminance is to be measured. 4. The value of irradiance/illuminance will be indicated on the display. If at any time only a "1" appears in the left hand display position, then the measurement is out of range. Indicated values are as follows:
|
Item #600643 |
SPECTRONICS ACCUMAX™ XRP-3000
The AccuMAX™ XRP-3000 radiometer/photometer uses a dual wavelength UV-A/VIS sensor detector to measure both ultraviolet and visible light. Featuring automatic zeroing, integration and signal hold, the unit provides accurate readouts for UV, visible irradiance or radiance. The LCD readout features ±0.2% linearity with the sensor sending the linearity correction data to the readout unit during initial power up. To ensure consistent results, sensors are designed with superior bandpass filters while optical stacks are assembled in Class 100 clean workstations. For precise spectral coverage, high-quality interference filters are used to resist degradation.
Features
|
© 2012-2014 ndtblacklight.com